Blog

With all of the rush and hotch-potch of daily living, it is easy to ignore the value of our drainage and piping systems.

However, a drainage or pipe problem can rapidly become your worst nightmare when calamity hits.

As a result, one feels that prevention is always the best answer.

Prevention is the most effective strategy to keep a healthy drainage system. In general, if you are careful about what you throw down your drains, you should not have to clean them very often.

However, blockages can occur, and it is critical that you understand how to resolve these issues as well as how to keep your drains in good working order. 

A blocked drain is one of the most common issues homeowners experience! This is the article for you if you’re concerned about the health of your drainage and pipe system.

Tip 1: Keep the Drains Clean

When water and garbage are unable to flow freely, pipes and drains get clogged. This is usually caused by a buildup of muck in the pipes.

We recommend cleaning the drains once a month using an enzyme-based cleaner rather than a chemical-based cleaner, which can harm your pipes.

Baking soda and vinegar are a common DIY treatment; let it remain in your drain for 15 minutes before washing with hot water.

Tip 2: Use a Drain Guard 

It would be great to get a drain guard or drain trap installed on all of your plug holes to decrease the quantity of the garbage that goes down the drain.

Drain guards are little, grate-like discs made of metal or plastic that sit on the top of the drain to catch debris, which you can then remove and discard.

You may also purchase a shower drain guard to capture debris such as loose hair that may wash down the drains.

Remember to dispose of the non-disposable items such as oils and cooking fats and coffee grounds.

Tip 3: Keep Certain Things Out of the Drain 

You may help prevent blockages by disposing of the following items in the garbage rather than the drain:

• Medications
• Paper towels
• Napkins
• Fruit peels
• Eggshells
• Household cleaning products

These things are difficult for disposal systems to break down, and they may create serious drain clogs.

We should all know the principles of flushing, yet it’s easy to grow complacent or lazy. It is critical to flush only toilet paper and human waste while keeping healthy pipes and drains.

There will be no nappies, ‘flushable wipes’ (which are never truly flushable), tampons, or paper towels, etc.

Tip 4:  Boiling Water Inside the Drain 

One of the simplest methods to keep your drain healthy is to clean it once a week with hot water.

The hot water melts down the oil from the food and keeps it flowing down the drain rather than accumulating on the inside the pipelines causing slow drains and blockages.

Tip 5: Avoid Pouring Greasy Things Down the Drain

Never, ever throw oil down your drains. All of your pipes finally join to a major drain under your house.

This implies that spilling grease will cover not only your kitchen pipe but every line leading to the main sewage.

Tip 6: Always Look Out for Drain Troubles 

It’s always a good idea to keep an eye out for potential problems and to be cautious.

Is there any evidence of leakage? Is there anything out of the norm that you can detect? Keep an eye out for moist spots or leaks, which are frequently an indication that anything is amiss.

Drainage system issues can occasionally go undiscovered until it’s very late. But if you properly inspect your house, you may see some clear signs of drainage problems.

Is there any sign of leakage, or can you smell anything out of the ordinary? It’s a red sign if you start to see bigger wet patches around the property that shouldn’t be there.

Tip 7: Look for the Water Temperature

You might choose to wash your hands with lukewarm water.

But did you know that really hot water will dissolve grease buildup in your drain?

Make it a habit to run hot water at least once a week.

However, there is one moment when you should use cold water rather than hot water: when you run your garbage disposal.

When you run your garbage disposal with hot water, the grease may melt and coat the drain. Cold water will keep the grease solid, allowing the disposal to break it down.

Tip 8: Avoid Pet Hair from Entering the Drains 

Bathing your dogs is an overwhelming challenge. If you’re anything like me, you undoubtedly spend at least 30 minutes chasing your pet around the house just to get them in the bath.

And then there’s the hair that appears to accumulate around the plug hole. Well, we’ve got some ideas for that, too!

Simply drape a washcloth over the shower drain to collect excess hair and toss it in the trash later. This will reduce the amount of animal hair that gets up in the drain dramatically.

Tip 9: Get Timely Maintenance Services 

Getting the drains cleaned and maintained is indispensable if you do not want to experience any drain-related problems. Look for a reliable plumber in Galston and ask them to inspect the drain to find any issues.

Timely maintenance also cuts down the chances of any major drain-related problems, and you can quickly get the issues resolved without spending a lot of money. 

Final Thoughts 

With these eight tips in mind, you can ensure the drains remain healthy and function properly as you want. A clogged drain can be a costly affair, so it would be better to avoid it in the first place. 

At Sydney Plumbers, we are readily available to deal with blocked drains. Whether the drains aren’t flushing properly or there is any sort of blockage.

Click on the Contact Us button to hire our expert plumber, and ensure your drains flow properly throughout the year.  

Despite the fact that most residents receive already treated water, many Australian households choose to utilise a water filter or any type of home water filtration equipment to get rid of the contaminants.

People usually prefer tap water filters, which is a common type of water filter used in households. However, several filtering systems have better filtration than the tap filters.

This causes some individuals to wonder, “Are faucet filters effective?” Is it worthwhile to spend the money, or should I acquire a more costly model?

So, we’re ready to find out this question and all of the confusion around this water filtering system.  

The Difference between Purifying and Filtering 

Because contaminant-free water is closely related to our health, individuals will go to great lengths to obtain the cleanest water for their families.

However, it appears that many individuals do not grasp the phrases purifying and filtration, and often confuse the two.

Despite the fact that most people use these terms interchangeably, they are really different. Similarly, purifiers and water filters aren’t the same thing.

Filtering is the process of removing bigger pollutants from previously treated water.

Because the water has been treated with bleach and other chemicals, it has an unpleasant odour that we notice when we drink it.

In addition, your treated water may include chlorine and lead, which are both harmful to your health.

Filters such as faucet and pitcher filters are used to filter chlorine and lead and make the treated supply water odourless.

Furthermore, these filters eliminate dust, debris, bacteria, cysts, mercury, and other toxins from water.

Purifying, on the other hand, indicates that the filtering system removes everything, even if it’s microscopic particles the size of arsenic.

If the water has not been treated or has been handled incorrectly, it must be purified. The RO – Reverse Osmosis water purification system is a prime example of this.

Many nations provide clean water to their populations; nonetheless, the water appears to include hazardous chemicals such as arsenic.

How Does a Tap Filter Work?

Now that you have a better understanding of water filtration and purification, you will find it much easier to grasp faucet filters.

A faucet filter works by trapping different sediments like dirt and sand. It also removes chlorine and lead from your water.

Installing a tap water filter in the kitchen or anywhere else in the house will allow you to drink odourless and tastier water. When you attach the filter to the tap, it’s plastic or metal shell surrounds the tap’s mouth. 

Inside the shell is a filter cartridge that handles all of the filtrations for you. This filtering procedure consists of many phases.

Sediment Filtration 

When you turn on the water, it passes through a non-woven screen wrapped around the filter cartridge. This screen collects dirt, sand, and other fine particles.

Activated Carbon Block 

After the water gets free from sediments such as dirt and sand it passes through a film of activated carbon block that traps the impurities quickly.

The film has an absorbing surface with crevices and nooks due to the millions of tiny microscopic pores.

When water flows through this stage, nooks and crannies capture pollutants and effectively remove chemicals, mostly lead and chlorine.

More contaminants are removed as water travels slowly through this block of carbon. If the surface of the activated carbon becomes clogged, you will not receive effective results unless you clean or replace the cartridge.

More sophisticated faucet filters include extra layers that remove more impurities than standard ones.

Some versions use pre-treated activated carbon, which impregnates another material into the carbon to improve filtering. Some manufacturers add slivers to the filter to kill fungus and germs.

Chemical Removal 

The last process significantly minimises the number of chemicals. Although the activated carbon block removes the impurities significantly, the tap filters go one step ahead, and remove the chemicals from water.

This step ensures that you always obtain odourless, tastier water. The number of impurities trapped is determined by the length of time the water is in contact with the cartridge.

Water that flows slowly is cleaner than water that flows quickly. That is why many versions allow water to trickle slowly through the tap, resulting in cleaner water.

Are Tap Water Filters Effective?

The efficacy of a tap water filter is determined by where it will be used. When it comes to filtering treated water, you will receive great outcomes.

The filter will eliminate chlorine and lead while also decreasing sediment levels. Furthermore, it will enhance the general flavour of the water as well as remove the chemical odour.

You can easily remove impurities from your tap water and drink chlorine- and lead-free water that tastes better. It is the most affordable water treatment equipment that provides better drinking water. You can increase total water quality by 20% by using such a gadget.

However, utilising a faucet filter to filter untreated, untested, and severely polluted water will not work. Don’t buy a faucet water filter if your water supply is heavily polluted.

You should opt for a more modern system, such as RO – Reverse Osmosis, which can successfully remove up to 95% of impurities and offer you the cleanest and purest water available.

Final Thoughts 

Now that you know everything about the effectiveness of tap water filters, you can decide whether to use such filters or not. At Sydney Plumbers, we are the number one licensed plumber in the area that can install full-house as well as partial water filters.

Click on the Contact Us button to hire our expert technicians today.

Do you have any idea why your new tap is spilling or leaking? Our comprehensive guide provides all the information you need to set your mind at ease and figure out what’s wrong with your leaky faucet.

Tap leaks are inconvenient, to say the least, and if not repaired promptly, they can cause water damage throughout your house. Unfortunately, it’s a problem that many Australians deal with on a year-round basis.

Most people, however, are unaware of the true causes of their taps leaking. Even a little leak can waste up to 18 litres of water every day, significantly increasing your water expenses.

That is why it is critical to understand the reasons for a leaky tap and how to repair it. We’ve gathered a list of some of the most common reasons for a leaky tap in this post.

We’ve also included step-by-step instructions for repairing it, so you don’t have to pay an expert and spend hundreds of dollars.

Let’s get right to the good stuff now, without further ado.

Reasons Why New Taps Leak 

There can be many reasons why taps leak and especially the newly installed ones. Go through these common causes and get the problem fixed right away.

Worn-out O-rings 

The O-ring is a little disc that connects the stem screw to the tap’s handle and holds it in place. It might get loosened or wear out over time. If the leak seems to be coming from the faucet’s lever, it’s most likely due to a worn-out o-ring.

Damaged Washers 

Damaged washers are another typical cause of a leaky tap that many people are unaware of.

The washer is in contact with the valve seat, and the continual friction between the two pieces can wear it down and harm it over time. A washer that isn’t correctly placed might also cause a leak in the faucet.

Inconsistent Water Pressure 

Is your tap only dripping when you turn the handle in a specific direction? If this is the case, it signifies that your home’s water pressure is causing it to dribble.

Damaged Valve Seat 

One of the most typical reasons for a leaky tap is a broken valve seat. If you detect that there is a leak in your home, it’s a sign that something’s amiss with the valve seat if it’s coming out of the spout. 

Caused by corrosion induced by silt accumulation, the valve seat weakens with time. Clean the valve seat on a regular basis to avoid this.

Broken Cartridge 

If you’ve chosen a cartridge-style tap, make sure the cartridge isn’t damaged or worn out. If you find a leak within the first few weeks after purchasing it, it’s a sign that you’ve made a mistake.

I was sold a faulty cartridge. As a result, you must contact the vendor to get it changed with a compatible cartridge.

Quick Fixes to Get Rid of Leaky Taps 

Turn off the Water Supply 

First and foremost, you must turn off the water supply; otherwise, the entire house may be flooded. Look under the sink for the shutdown valves and make sure the handle is turned clockwise.

You must turn off the main water supply if your tap does not have a shutoff valve. Rotate your tap clockwise and see if water is coming out or not to ensure that the flow has been switched off.

If there is no water flowing out, you have successfully switched off the water source.

Remove the Top Handle 

The handles of your leaky tap must then be disassembled. To do so, remove the caps from the top of the handle with a flathead screwdriver.

This will expose the handle screws, which must be removed. To remove the handles, unscrew them.

Inspect and Replace the Broken Parts 

If you see any parts that are damaged or worn out, replace them immediately.

All of the necessary components may be found at your local hardware store. Carry your old components to the hardware shop and ask for duplicates to ensure you obtain the appropriate parts.

Clean the Valves 

Once you’ve removed the cartridge or stem, you’ll need to clean the valves. Even if your tap is brand new, mineral accumulation is unavoidable.

As a result, be certain that it should be cleaned. We strongly advise saturating the valve with white vinegar and leaving it to soak for at least 5 minutes.

Scrub it away after it has thoroughly saturated. Don’t forget to clean the remainder of the sink to bring it back to life.

Reassemble the Tap 

After you’ve finished cleaning and reinstalling the pieces, put the tap back together and turn on the water supply to see whether there’s a leak.

If there is no sign of a leak, the leaky tap has been fixed. You may need to contact a professional if this is not the case.

Call Professionals for Help 

Is the tap still leaking? There may be some issue with the innards, which can only be replaced by a trained professional. You should call the local leak detection plumbers in West Pennant Hills to get the tap inspected and fixed.

Final Thoughts 

A leaky tap isn’t just annoying but results in a lot of water wastage. It would be great to get the issues fixed right away, and this tap repair guide will help you do that. If you don’t have an idea of how to disassemble a tap and check for issues, you can watch some DIY videos.

Or the best way is assigning the job to professionals. At Sydney Plumbers, we can fix all types of leaky taps at affordable rates.

Click on the Contact Us button to book an appointment today, and our experts will be there to fix the tap. 

Buying a new house requires a significant investment and a lot of research! However, even after putting in their 100%, a huge percentage of new home buyers experience some common plumbing issues!

However, this is something not to worry about, as most of these issues are easy to fix, provided you have got the property inspected by a reliable house inspector.

Here are six common plumbing problems you have to face in a new house. Also, I’ve listed a quick and easy solution to overcome every problem like a pro.

Is It Normal to Experience Plumbing Issues in a New Property?

The short answer is yes! Unfortunately, a lot of people often panic after experiencing these plumbing problems thinking that they have invested in the wrong property, but that’s not the case.

You have got a new house that hasn’t been used for quite some time, so it is obvious to have some issues. The faucets may leak because there was no one to repair them, or you can even have a clogged toilet because.

It is completely okay to have some minor plumbing issues when you move into the new home.

Plumbing Issues in a New House and Quick Tips to Avoid Them 

1. Low Water Pressure
   The most common plumbing issue around 80% of new home buyers face is low water pressure. The simplest reason for the low pressure is due to the deposition of sediments inside the faucets or the connected pipelines.
   When taps haven’t been used for a few months, the sediments deposit inside them, causing slow water pressure.
   Solution:
   Unscrew the tap’s dispenser, and rinse it with water to clean the mineral deposit. If the issue is still there, then you need to see a plumber since only a professional can clear the blockage inside the pipeline. 
2. Slow Flowing or Clogged Drains
   Another common problem most homeowners report is slow-flowing drains. Be it the bathtub drain, clogged dishwasher or the kitchen sink, you may find it draining slower than usual because water has not been run in the pipes for some time, and there may be dust and debris settled down there.
   Solution:
   Sometimes the issue vanishes automatically as you start flushing water down the drain. If this is not the case, take a plunger and try to resolve the blockage. You can even try a mix of hot water and vinegar as it is a natural method to unblock a drain.
   If none of them works, contact a reliable plumber in Stanhope Gardens, and get the drains fixed.
3. Leaky Faucets and Showerheads
   The water dripping from the faucets and showerheads deserve immediate attention, and you can use a wrench to fix the issue.
   Solution:
   Fixing a leaky tap is not a big task, and you can do it by following any DIY guide. Make sure to turn off the water supply before you put the wrench over the tap to avoid water from overflowing inside the house.
4. Running Toilets
   A running toilet is the most annoying of all toilet problems, and it also has a big impact on the water bills. Some new home buyers report this issue after they use the toilet for some time.
   Gurgling noises and frequent blockage are other common problems new home buyers face.
   Solution:
   The problem lines inside the cistern. If you have the tank outside the wall, open the cistern’s lid and access the flapper. Check for any leaks in there, and ensure everything looks fine. You can consider replacing the flapper to stop water inside the tank.
   However, this solution does not work for concealed tanks because they are inside the wall, so it would be great to call a plumber in such cases.
5. Water Heater Issues
   Spotting a water heater issue is the easiest, you turn on the heater and do not get hot water even after hours. Usually, new homes have new hot water systems installed, so experiencing hot water issues is not very common.
   But, in some cases, the heaters aren’t installed properly, which is the root cause of this problem.
   Solution:
   Check the water heater, and ensure it is turned on after you switch on the button. Also, read the instruction manual of the heater and make sure the valve is turned on so that you get hot water inside the house.
6. Sewage Backup
   I’ve come across several homeowners that reported sewage backup issues after a few months of shifting into the new house. Well, the root cause of the problem is a blockage. Some people flush things down the drain that aren’t meant to be flushed, and this in return blocks the entire pipe that transfers the house’s waste in the sewage tank.
   Solution:
   Dealing with sewage is not a cakewalk, so it is essential to hire a plumbing guy and get the issue fixed. 

Conclusion 

These are the six common plumbing issues that most new home buyers experience. Follow the solution listed below these problems and overcome them without any troubles. 

Also, if you don’t have any idea how to deal with a plumbing issue, you should contact Sydney Plumbers. We have a team of expert and licensed plumbers that can fix any type of plumbing issue. 

Click on the Contact Us button or give us a call to hire our plumbing technicians today!

 

As per a report by Chubb, fixing severe water damage in Australia can cost as much as  A$30,300*! So you might be wondering how someone can charge this much to repair damages caused by water.

Well, water damages are severer than you think, and in some cases, they can cost you even more. This is because the water floods under the ground, causing damages to the structural integrity of the building, and it is a major reason why water damages shouldn’t be taken lightly.

However, there’s a way you can curtail the chances of damages caused by water leaks, and that’s keeping an eye on the below mentioned nine signs.

Always look for these signs, and call a leak detection expert right away if you notice any of them.

1. Your Water Bills are Showing a Hike Every Month
   The first sign you’ll see is a mysterious hike in the monthly water bills. The average water consumption of a regular Australian is 200 litres per day, and you can quickly reckon how much water your family is consuming by multiplying this figure with the number of members.
   If the water bills show more usage, then it’s a sign to worry. Before you call a reliable plumber in Hills District, it would be great to check all taps, dishwashers, washing machines and toilets.
   Sometimes, the reason behind the risen water bills is water leaking through these sources. However, once you are sure none of these things is leaking, there may be some leaks in the pipes.
   It would be great to get in touch with a local plumber and get the pipes inspected before things get out of control.
2. Ceilings with Big Water Stains
   If the beautiful ceilings of your house have developed big water stains, it could be a sign of water leakage. The pipes going through the ceiling might be leaking, and the water gets absorbed by the ceiling, which causes massive stains.
   If you are not sure about the cause of such stains, a professional plumber will be a great help. However, you should never ignore such stains, as they can hinder the structural integrity of the roof, and they may collapse if things get worse.
3. Less Water Pressure
   Another tell-tale sign of water leakage is reduced water pressure, and you do not need a plumber to figure it out. If the taps and showers have lower pressure than before, it could be a sign that the water is getting out of some other point which could be a leak in the pipeline.
   Before you contact the plumber, check all toilets and look for leaks. Furthermore, have a look at the appliances such as washing machine, dishwasher, and water heating system to ensure there is no leakage at all.
4. Damp Areas in the Garden
   If you notice boggy areas in the garden that weren’t there before, it could be a sign of water leakage. The soggy and slushy areas in your yard show that the water is leaking from the main pipe.
   Furthermore, another reason can be damaged sewer pipe or sewage backup. But, again, only a professional leak detective can diagnose what’s wrong, as it may require digging some area of the lawn to inspect the pipes.
5. Rattling Noise in the Pipes
   The rattling noise coming from the pipes is not always a sign of a leak, but if you frequently hear such sounds, it indicates the plumbing system is not in good shape.
   The clamps and other accessories that hold the pipes together get loose after some time, and the pressure of the water causes rattling. Also, the leak causes the pipes to rattle continuously.
6. Mouldy Areas Everywhere
   If the pipelines start leaking, every area around your house will get mouldy and wet. The water seeps inside the walls, ceilings, and the floor making them damp, and it gradually grows into the mould.
   If some areas of your home show persistent mould growth, it indicates that there is a water leak somewhere that needs immediate attention.
   There are plenty of bad effects of mould, such as it affects the health of the people while weakening the structure of the house. 
7. Cracks in the Building’s Foundation
   This is the biggest damage water leaks can cause, and that’s why getting the leaks repaired can be exorbitantly pricey. The cracks in the building’s foundation do not occur overnight and can take months, and in some cases, a few years.
   If you see small cracks on the outside of the foundation with some damp areas, it indicates that there is some water leakage down there. The dampness can increase over time, so it is better to get a plumber for inspection and repairs.
8. Warped Flooring
   Sometimes the leak is not overhead but underfoot. The pipes leaking under the floor do not cause mouldy walls, but the floor gets warped. Warping is most likely to get in the laminated and wooden floor.
   If the warping is not excessive, it could be in multiple areas such as the kitchen floor, the floor of the storeroom, and other areas around the house. 
9. A Speedily Running Water Meter
   This is one of the easiest ways to figure out if there are some leaks or not. Keep an eye on the water meter, and see if it’s running continuously or not. Shut all taps and other sources of water, and then check the meter again; if it is still running, there may be some leaks.

Final Thoughts 

If you find any of these nine signs, you should contact a local plumber in your area. At Sydney Plumbers, we are the most preferred plumber that can quickly detect any type of leak irrespective of the severity.

Hiring the best technicians with us is easy, and you can click on the Contact Us button to book an appointment today.

Cooking oil is one of such things you should never put down the drain, but if you operate a commercial kitchen, this is bound to happen! 

Cleaning the big cauldron, the dishes, and other things result in oil flowing through the sink and entering the main sewer line causing blockages, and other problems.

However, there is one amazing solution to this problem, and we plumbers call it the “grea1000se trap”. It is exactly what it sounds, and the primary purpose of this device is to filter the grease. 

Here’s what a grease trap is and why every commercial kitchen should have one.

What is a Grease Trap?

Grease traps have been in existence for more than 100 years, and almost 90% of commercial kitchens use them. Some people even call it grease converter, catcher, or FOG traps. 

The grease trap is a metal box device with an inlet and outlet. The inlet allows the wastewater from the sink and filters it. The grease and oil-free water then escape through the outlet, and you get all the grease collected into the trap.

This device is ideal for a wide range of environments, including:

• Bakeries
• Restaurants
• Cafes
• Takeaways 
• Hotels
• Bars, pubs, and inns 
• Colleges and schools 

Type of Grease Traps 

There are different types of grease traps available, and a reliable commercial plumber in Sydney can install them for you. Choose the type of grease catcher that fits your budget and fulfils the requirements.

Gravity Grease Traps 

Gravity grease catchers don’t need power to work, as they work using gravitational force. These massive tanks installed under the ground are good for big commercial kitchens like hotels, colleges, and more.

Automatic Grease Traps 

The automatic grease traps require power to work. These units have specialized filters that check the grease levels automatically and start cleaning the water. 

You get complete control over the filtering levels, and there is a dedicated controller. Available in a range of sizes, these automatic devices are ideal for bakeries, hotels, pubs, restaurants, and small eateries. 

Passive Grease Traps 

The traditional passive grease interceptors are the cheapest of all and are used widely across commercial kitchens. Just like the gravity grease traps, these devices also don’t need any power or electricity. 

There is a removable filter that filters the grease, and you can clean it easily whenever required.

Top Benefits of Using a Grease Trap 

There are plenty of reasons why every commercial kitchen should have one or two grease catchers. This is an essential device that keeps the pipes clean and prevents several sewer-related issues.

Here are some advantages you need to know:

It Prevents Clogging 

Unclogging a commercial kitchen sink is challenging and requires a certified commercial plumber. But a grease catcher reduces the risks of clogging, as the major cause behind blocked pipes is grease.

The catcher also traps other elements such as big chunks of food and other contaminants that can harm the pipelines.

Lesser Chances of Pipe Damages 

Pipe damages can turn out to be an expensive deal for any commercial kitchen. Not just the damaged pipe hinders the kitchen operations, but repairing it may take many days. 

In severe cases, pipe relining is the only solution. But using a grease trap device helps reduce these risks. 

As there is no clogging inside the pipes, there are fewer or no chances of any severe damages. However, one should invest in regular maintenance and cleaning. Look for a local plumber in your area, and hire them for the regular maintenance job.

It Keeps the Sewers Clean 

Even if the oil and grease flow through the kitchen pipes, it can cause harm to the main sewer system, which will result in sewage backup, and your kitchen may smell bad.

Using a grease catcher is the best solution to prevent grease from entering the sewer lines. 

Maintenance Tips to Follow When Using a Grease Trap in the Kitchen 

So, you have decided to get a grease trap installed? Great, here are some important maintenance tips you should know to prolong the lifespan of the device.

Scrape Off the Leftover Food from the Plate 

After getting the grease catcher installed, you should be extra cautious when cleaning the dishes and cauldron. Before putting the dishes into the cleaning sink, remove the chunks of food. 

Recycle the Cooking Oil 

Cooking oil can be recycled and turned into biofuel, which is the new fuel for our vehicles. However, pouring it down the drain is not a good practice, as it can block the pipes.

Yes, the grease catcher will filter the oil, but you may need to clean it frequently, so it is better to use it for other purposes.

Clean the Trap Filter Regularly 

As per expert plumbers, you should clean the filter when it is one-fourth of the way full. The cleaning period of the trap depends on how busy the kitchen is. 

Monitor the trap’s filter, and empty it properly to prolong its life while keeping the pipes clean.

How Do I Get a Grease Trap Installed?

Getting a grease trap installed in your Sydney’s kitchen is easy. All you need to do is contact the trap manufacturer and get the right type of trap designed for your kitchen.

Furthermore, contact a reliable plumber, and get the grease catcher installed inside the kitchen. 

Final Thoughts 

There are numerous benefits of using a grease trap, so you should get one for your commercial kitchen. At Sydney Plumbers, we have a team of dedicated technicians that can install any type of grease catcher at reasonable rates.

Moreover, we offer regular maintenance and cleanings services for commercial kitchens. Click on the contact us button to hire our experts today or to know more about grease trap installation.