If the cycle of wiping up the puddle from under the dishwasher is an everyday task, we are sorry to inform you that you’ve got a leaky dishwasher.
No one appreciates the importance of a dishwasher until something goes wrong with it. Well, dishwasher leaks are getting frequent, and some of the serious leaks can even void the warranty.
While the reasons behind the leaks are still unknown to many, we are here with the seven common causes of leaking dishwashers.
Furthermore, we’ve even listed the best possible solutions you can opt to ensure the appliance works fine without any issues.
-
Uncleaned or Clogged Dishwasher Filters
Not cleaning the filters certainly results in leakage, as the wastewater finds its way through other parts of the dishwasher. The residual food and other foreign objects build up on the filter preventing the water from flowing through the wastewater outlet. Keep an eye on the cleaning performance of the dishwasher. If you encounter any sudden increments in the timeframe of the cleaning cycles, it is a clear sign of a clogged filter. Cleaning the filter is easy, and you can do it without any professional help. Just get the instruction manual handy, and go through disassembling the filter and cleaning it. You will surely see a huge improvement in the cleaning appliance’s performance after cleaning the filters.
-
Leaky Dishwasher Door
Do you see a water puddle under the dishwasher door? It may indicate that the door is leaking and isn’t able to keep the water inside. After regular use, the latch gets loose or bends which results in leakage. The best solution to fix the issue is to tighten the closure or install a new latch system in place. If the dishwasher is under warranty, you should call the company to get service. The team will inspect the latch and will replace it if required. Another reason can be a damaged gasket. The service team will also take care of this. An Important Note: When inspecting or tightening the latch, make sure to pull the power cord out of the socket.
-
Improper Alignment
This is a common cause of dishwasher leakage in 50% of the cases. Improper alignment results in water leaking from the door. Always place the dishwasher on a flat surface. Or place shims under the unit, and adjust it until perfectly levelled. It is advised to check the level of the dishwasher every time you encounter a leakage.
-
Poor Installation
All the novice dishwasher installers out there often struggle with leaks after some time. Well, installing a dishwasher properly is not a piece of cake. From levelling the unit to making the connections, there are several complexities involved. Furthermore, improper installation can even void the warranty if some part gets damaged. Always opt for dishwasher installation services in Sydney. These professional installers have the know-how and expertise to install the appliance properly so that there aren’t any leakages in future.
-
Defective Pump
A defective water pump also causes dishwasher leaks. The purpose of the pump is to circulate the water inside the unit and flush it from the outlet after cleaning. A pump that doesn’t work doesn’t flush the water out of the dishwasher, and it results in leakage. Inspect the pump and look for any signs of damages. If you are not sure how to access the pump, get the instruction manual handy, or call a reliable plumber to check it. Either get the pump repaired or get it replaced to make the dishwasher work again.
-
Using the Wrong Detergent
Well, it may come as a surprise, but using the wrong cleaning detergent can also result in leakage. Always use dishwasher-certified liquid when cleaning the utensils. Some folks use the regular dish soap, but it is not meant for a dishwasher. The excessive foam generated inside the dishwasher blocks the filter, and the water starts flowing out of the door. There are numerous brands out there that manufacture dishwasher-friendly liquids. So use them to prevent any leakages.
-
Overfilled Dishwasher
Sometimes the dishwasher takes more water than it can use, and that is known as overfilling. It forces the water out of the dishwasher, and as a result, the appliance starts leaking. Overfilling takes place due to the blocked water filter or the float valve isn’t working properly. It would be great to give a call to the professional plumbers or the brand if the dishwasher is under warranty. Clean the filter, and see if the water flows properly. We advise not to fix the float valve, as it can escalate the issue.
How to Avoid Dishwasher Issues in the First Place?
What if you can avoid most of these issues in the first place? Well, it sounds relaxing and will save you from a blunder. The best way to do so is to hire expert dishwasher installers in Winston Hills.
When you get the dishwasher installed by experts, be rest assured that it will have a perfect level and will be installed precisely as per the manufacturer’s user manual.
At Sydney Plumbers, we offer the most preferred dishwasher installation services in the area. We can install all branded dishwashers at reasonable rates.
Furthermore, we have trained our technicians on all dishwashers (residential and commercial). Click on the Contact Us button, and get a quick quote today.
When we do the job, we make sure to do it with expertise and care!
You must be logged in to post a comment.